In stock now — made to order in the UK, free UK delivery
Home › How a custom fit is made

How a custom fit is made

Most soap pumps are one of three shapes. Some are not. This is what happens when yours is not — including how often the first attempt fails.

Three shapes cover most pumps

The PALM comes in three fittings, and between them they cover most of the soap pumps in British bathrooms and kitchens. The fit guide is how you find out which one yours is, and it takes about a minute.

Some pumps are not any of them. Odd heads, square heads, levers that come off sideways, bottles somebody was given and likes too much to replace. That is what a made-to-measure fitting is for: a part cut for one named pump rather than for a shape.

It starts with your bottle, not a catalogue

There is no scanner and no clever software. It starts with photographs of your actual pump — one from the side, with a 2p coin next to it so there is something of a known size in the frame — and two measurements across the top of the head: the widest way, and the narrow way.

That is genuinely all I need to start. A phone photo on a kitchen worktop is fine.

Then it gets drawn, printed, and put on the bottle

The part is drawn to those numbers, printed, and then the only test that counts: it goes on the real pump and I try to pull it off.

The first one often does not work. That is not a disclaimer, it is just what happens. The first part I made for the IKEA TACKAN went on and sat there correctly — the shape was right — and then slid straight off if I tipped the bottle. The one after that gripped, but not in the way I wanted it to.

There are five of those test prints on my desk. Laid out next to each other you can see what changed between them: the channel goes from parallel-sided to tapered, the rails get taller and stop shorter, the mouth pulls in at the nozzle end, the bridge over the channel drops. None of them was sent to anybody.

A pink 3D-printed PALM disc fitted on the cream pump head of an IKEA TACKAN soap dispenser, seen from above and to one side. The underside of the same pink disc. The word TACKAN is cut into the inside wall of the channel that grips the pump, with gethandl.co.uk and PALM by handl around the rim. The top face of the same pink disc on a dark mat, with the handl wordmark and twelve short ribs running out to the edge.
This is the part one customer received. It is not a catalogue item. A made-to-measure fitting is cut for one named pump and printed one at a time — this one for an IKEA TACKAN, with the bottle’s own name cut into the inside of the channel so the part and the pump it belongs to cannot get separated. It is pink because that is the colour they asked for, and every part is printed in the colour its customer chooses. The test prints before it were printed in whatever was loaded at the time; the colour of a test print means nothing and none of them was sent to anybody.

What actually fixed it

The thing that made it grip was not making it tighter. A fitting holds onto a pump head by catching on something narrower than the rest of the head — so the answer was two small ridges standing six tenths of a millimetre proud on the inside faces, which bite as the part is pushed on. Making the whole channel smaller would have made it harder to get on and no more likely to stay.

Three attempts, then, for one bottle: one that seated and slid off, one that held wrongly, and one that goes on and stays on. That is a normal number.

What that does and does not prove

I would rather say this plainly than have you assume more than I know.

None of this is laboratory testing and I do not describe it as such. How I test it says the same thing about the standard range.

What it costs you if it cannot be done

Nothing. You pay when you order, I look at your photographs, and if I cannot make a fitting that holds your pump I say so and you get your money back in full — the ordinary 30-day returns, nothing special invented for this.

Nothing is printed until the fit has been confirmed with you.

If your bottle is already on the list

Some bottles have been done already, and those need none of the above — the part exists, it has been tried on that bottle, and there is nothing to send and nothing to wait for. The fit guide lists the ones that are confirmed.

Order a made-to-measure fitting Check which fitting you need first